Click image to view full size image
Mink MM 1402/1502 AV claw vacuum pumps
Mink claw vacuum technology offers the highest level of energy efficiency for industrial vacuum generation combined with the lowest level of maintenance as well as consistent performance. Pump sizes MM 1402 AV and MM 1502 AV also offer these advantages to applications that require higher pumping speeds.
Due to the sophisticated claw vacuum technology, Mink vacuum pumps achieve an extremely high level of efficiency, which has a positive effect on energy consumption and performance. In practice, this means energy savings of up to 60% compared to conventional vacuum technology when operated at the same pumping speed.
An additional benefit of claw vacuum technology is the virtually maintenance-free operation due to the non-contact operating principle: none of the moving parts inside the vacuum pump come into contact with one another, meaning there is no wear at all.
The need for maintenance, such as the inspection or replacement of worn parts, is completely eliminated. Due to the completely dry compression without the need for any operating fluids in the compression chamber, there are no costs for purchase, provision or disposal. Mink claw vacuum pumps are air-cooled.
The high operational reliability and long life cycles of Mink claw vacuum pumps are also a result of their non-contact compression without operating fluids. Due to wear-free operation, vacuum and suction performance remain consistently high throughout a life cycle of the pump. A smart silencer concept enables quiet operation.
Technical specifications
With Mink vacuum pumps, two claw-shaped rotors turn in opposite directions inside the housing. Due to the shape of these claw rotors, the air or gas is sucked in, compressed and discharged. The claw rotors do not come into contact either with each other nor with the cylinder in which they are rotating. Tight clearances between the claw rotors and the housing optimise the internal seal and guarantee a consistently high pumping speed. A synchronisation gearbox ensures exact synchronisation of the claw rotors. Mink vacuum pumps are driven by a directly flange-mounted asynchronous motor, with an efficiency class IE2.
Industrial vacuum generation for many applications
Mink claw vacuum pumps are available in a wide range of sizes. Special models for certain applications such as dust and gas explosion protection, high water vapour contents, gas tightness, increased oxygen contents etc. are also available.
| Technical Data | Mink MM 1402 AV | Mink MM 1502 AV | ||
|---|---|---|---|---|
| Nominal pumping speed | m3/h | 50 Hz | 400 | 500 |
| Ultimate pressure | hPa (mbar) | 50 Hz | 200 | 200 |
| Nominal motor rating | kW | 50 Hz | 7.5 | 9.2 |
| Nominal motor speed | min-1 | 50 Hz | 3000 | 3000 |
| Noise level (ISO 2151)* | dB(A) | 50 Hz | 79 | 80 |
| Weight approx. | kg | 290 | 325 | |
| Dimensions (L x W x H) | mm | 1310 x 515 x 545 | 1310 x 515 x 545 | |
| Gas inlet / outlet | G 3" / R 2" | G 3" / R 2" | ||
| *at 400 hPa (mbar) inlet pressure |
Tel：0086-21-50878197
E-mail：service@vacuumfamily.com
Skype：Kevin.law012
Web site：www.vacuumfamily.com
Mink MM 1402/1502 AV claw vacuum pumps
